Pipe and Fittings
Pipe and Tube
PROCESS AND STRUCTURAL APPLICATIONS
We can provide seamless and welded pipe for onshore, offshore, midstream, power and downstream applications, including line pipe, pipe for high temperature and pressure environments, abrasion resistant and HDPE pipe. We can also supply welded (SAW, ERW/HFI) and seamless tubular pipe for various structural/support uses.
Typical Stock Size Range* (size range may differ based on material grade):
ERW – ½” nominal to 26” OD
SAW – 24” OD to 48” OD (larger on request)
SMLS – ½” nominal to 36” OD
*Larger sizes and project specific dimensions manufactured to order.*
Pressure Equipment Directive (PED) and NACE MRO 0103 and MRO 0175 as applicable.
Material properties for pipe and tube
Our structural and process materials are offered in many supply conditions, including:
- PSL1, PSL2
- Seamless hot and cold finished
- Rolled and welded, including from HIC plate
- Annealed
- Normalized
- Quenched and tempered (Q&T)
- Thermo-mechanically control rolled and welded (TMCP)
carbon steel pipe
| Type | Specification | Grades | OD Range |
| Electric Resistance Weld (ERW) | API 5L (PSL- 1, PSL – 2), ASTM A25 | X42, X52, X60, X65, X70, X80, Grade 2, 3 | 1/8”-24” |
| Spiral Weld (HSAW) | API 5L (PSL- 1, PSL – 2), ASTM A252, | X42, X52, X60, X65, X70, X80, Grade 2, 3 | 24”-108” |
| Longitudinal Weld (LSAW) | API 5L (PSL- 1, PSL – 2), ASTM A252 | X42, X52, X60, X65, X70, X80, Grade 2, 3 | 24”-60” |
| Seamless | ASTM/ASME A/SA106 | Grade B, Grade C | 1/8”-36” |
| Seamless | ASTM/ASME A/SA53 | Grade A, B | 1/8”-36” |
| Seamless | API 5L | Grade B, X42, X52, X60, X65, X70 | 1/8”-36” |
Abrasion resistant and Induction Hardened (IH) Pipe
- Slurry Pipe / Abrasive Resistant Minimum 230 Brinell Hardness
- Ultra 600 IH, 500IH and 400H
- Chrome carbide
- Twin wall IH pipe
Dual-Layer Fusion Bonded Epoxy (ARO) Coated Pipe
HDPE Pipe
- ASTM D2513 gas pipe
- ASTM F714 industrial
- ASTM F3035 industrial
- C-901 water pipe
- AWWA C-906 water pipe
- FM underground firewater
- API 15LE oil patch pipe
FITTINGS
Edgen Murray provides a broad range of fittings, flanges, and other components to complement our extensive pipe and valve offerings.
- Seamless and welded buttweld fittings (elbows, tees, reducers, caps)
- Special fittings (induction bends, barred tees)
- Forged fittings
- Segmentable fittings
- Flanges / API flanges
- Special flanges (spectacle, long weld neck, swivel, anchor, misalignment)
- Nuts, bolts and gaskets
- Pile points for civil construction
Material Grades
| Product | Material Specification | Grades |
| Butt Weld Fittings |
|
|
| Butt Weld Fittings |
|
|
| Flanges |
|
|
| Flanges |
|
|
| Flanges |
|
|
| Pressure Fittings (including Olets, Swage Nipples and Pipe Nipples) |
|
|
| Pressure Fittings (including Olets, Swage Nipples and Pipe Nipples) |
|
|
Coating and Finishing
Edgen Murray’s in-house expertise and experience in the manufacture, supply, and delivery of API coated line pipe to the oil and gas, water and slurry pipeline markets allows us to support you at every step of your project’s lifecycle.
COATINGS & LAYERS
| Coatings | Layers | Characteristics | Specifications |
| Internal Coating |
|
|
|
| Fusion Bonded Epoxy (FBE) |
|
|
|
| Dual Layer Fusion Bonded Epoxy (ARO) |
|
|
|
| Three Layer Polyethylene (3LPE) |
|
|
|
| Three Layer Polypropylene (3LPP) |
|
|
|
| Concrete Weight Coating (CWC) |
|
|
|
| Powercrete |
|
|
|
| Two Layer Polyolefin
P R I T E C ® |
|
|
|
Piling Solutions
At Edgen Murray we understand our clients require services that go beyond product supply and we strive to offer turnkey pipe pile solutions that you can trust. Our steel network of certified partners offers material consultation, fabrication & coating services, complex logistics, and document control. We supply fabricated piles for marine structures as well as land-based stabilization piles, foundation piles, and a wide range of pile accessories. However simple or complex your requirements, Edgen Murray provides the products and services that meet your job requirements and schedules.
- Pipe Pile Accessorie
- Protective Coatings and Linings
- Shear Rings and Lifting Lugs
- Splicing and Delivery of Engineered Lengths
- Fabrication to AWS D1.1 and DOT Specifications
- Logistics; Truck, Rail, Barge, and Storage
- Project Management and Document Control
SPECIFICATIONS
| Type | Specification | Grades |
| Electric Resistance Weld (ERW) |
|
|
| Spiral Weld (SSAW) |
|
|
| Spiral Weld (SSAW) |
|
|
| Longitudinal Weld (LSAW) |
|
|
| Longitudinal Weld (R&W ) |
|
|
| Longitudinal Weld (LSAW) |
|
|
| Seamless |
|
|
| Seamless |
|
|
CUTting
Cutting in the steel industry can take a number of different forms. Edgen Murray has a great deal of experience in the cutting and preparation of steel. Saw services are available through our network of processing partners, where we offer pipe cutting from ½” to 27” OD. Beveling services are also available for up to 48” diameters.